10 Gallon Battery Foam Unit with Stainless Steel Ball Valve

FPFU516SBV

Contact us to purchase

  • Draws from pre-mixed solution
  • Battery operated
  • Up to 45 minutes of continuous use from one charge
  • Stainless ball valve with foam fan tip
  • Hinged back plate provides tool-free access to components
  • Natural color tank for easy visibility of product levels
  • Hinged lid
  • Color coding options:
    Lid – 5 colors (BK, BL, GN, YL, RD)
    Discharge hose – 4 colors (BL, GN, YL, RD)
  • Integrated hose wraps
  • Front-facing drain
LIQUID TEMPERATURE RANGE 40-100˚F (4.4-37˚C)
ELECTRICAL REQUIREMENTS 120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only
OPERATING VOLTAGE 12 VDC
CHEMICAL COMPATIBILITY Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

 

POWER TYPE Battery
BATTERY CHARGE TIME (FROM FULL DEPLETION) 8 hours
BATTERY RUN TIME (FROM FULL CHARGE) 45 minutes of continuous use
CHEMICAL PICKUP TYPE Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME) One product
SUCTION LINE LENGTH/DIAMETER 3/8 in. (9.5 mm) inside diameter
CAPACITY 12.5 gallons (47.32 liters)
DISCHARGE HOSE DIAMETER/LENGTH 12 ft. (3.66 m) hose, with 3/8 in. (9.5 mm) inside diameter
DISCHARGE WAND/TIP TYPE Polypropylene trigger handle with 50˚ fan tip
OUTPUT DISTANCE 5-6 ft. (1.52-1.83 m)
OUTPUT VOLUME 4-5 gal/min (15-18.93 l/min) of foam
FLOW RATE* Up to 1 gal/min (3.8 l/min)
PUMP SEALS Santoprene, Viton, or Kalrez
WHEEL TYPE Two 10 inch non-marking wheels

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

What’s in the box?

  • Complete foam unit with discharge hose and wand
  • Battery charger
  • User manual

Purchasing options

  PUMP SEAL MATERIAL  
FI-10N Santroprene (standard) -B-SSBV
Viton (V)
Kalrez (K)

Add bold option codes to item number as shown. For standard options, no option code is needed. Examples:

  • FI-10N-B-SSBV (standard unit with Santoprene pump seals)
  • FI-10NV-B-SSBV (unit with Viton pump seals)

Other available options:

  • Color coding – lid +/or discharge hose

 Pump Seal Material Compatibility